Main Improvement Improvement in a Car Improve Glass Washer

Improve Glass Washer


Views: 2012

To lavage was applied to the glass immediately after the motor washer inlet hose must always be completely filled. In normal construction Getz liquid is constantly leaving the pipe rear window washer, as well as flows from the front window washer hose when the tank is little liquid.

This drawback is easily inserted into the system to remove the washer valves. I ordered valves Toyota (part code: 85321-26020).

One set back between the door and body, there already was a regular connector, it was removed and replaced with a valve, even did not have to cut.

Soedinenie hoses back stekloomyvatelya
Razedinyaem hoses back stekloomyvatelya
Klapan ustanovlen

To install a second added a piece of plastic tube washer zhigulevskogo store, which was put on the washer motor and connected to the valve full-time and a new piece of pipe.

The valve is installed on the front headlight
The valve is installed on the front headlight

Now, when the washer fluid motor instantly comes to glass. With the front and had never before been a long wait, but still a noticeable difference, but the rear was just great! The fluid does not go away!

Was the information helpful or interesting?

1

Share with friends:


Also you may subscibe to «Do it Yourself Technics Repair» to get the updates to your e-mail


Look at other articles at this section: