Main Technics Repair Repair of a car Turbocharger Cleaning of CRDI Engine

Turbocharger Cleaning of CRDI Engine

Views: 16981

1 2

I'm sorry for not perfect english. In time I'll do a good quality translate. If you could not get anything please feel free to contact me in comments. I will answer you as soon as possible.

It was decided to disassemble and clean the turbine to see the inside. Suddenly, what should be replaced.

How to remove it in stages described in other articles: you remove the nozzle, then the rocker cover, camshaft, it is desirable to lifters, not spilled. And after all of the above remove the cylinder head the exhaust manifold. You may need to remove the exhaust manifold.

If rough, then the turbine consists of three parts: a core, "snail" exhaust gas "snail" air.

"Snails"-a piece of iron, named for its resemblance to the eponymous shellfish.

The interesting part-the middle,. It contains the mount, bearings, axle, on which the two impellers, as well as the middle, connected to the oil supplying pipe.

To remove the exhaust "snail" to unscrew a small screw that holds the clip in the form of two clips and remove it (green rectangle).

clamp that connects the turbine

Next, unscrew the vacuum diaphragm (it held by two screws) and remove the air hose.

unscrewed diaphragm vacuum, air hose removed

Now, this part holds nothing but rust and dirt and can be removed carefully. Carefully, because it is directly under the impeller, and it need not be damaged.

Krylchatka exhaust gazov

Impeller cleaned from dark plaque.

The purified exhaust impeller

Pumps the impeller to get out of "snail" was not only the top looked at her and brushed.

escalate the impeller
1 2
Was the information helpful or interesting?


Share with friends:

Also you may subscibe to «Do it Yourself Technics Repair» to get the updates to your e-mail

Look at other articles at this section:


07.11.2014 at 01:22 michael crumlish said:

Thank you, great help.

Regards Michael