I'm sorry for not perfect english. In time I'll do a good quality translate. If you could not get anything please feel free to contact me in comments. I will answer you as soon as possible.
To replace the matrix caught computer Acer Aspire One (Model №: ZH9) with a vertical crack in the center of the screen.
Well, pick up a matrix and change it.
First, a sharp object, remove the cap of the two screws on the bottom of the front panel and remove them.
Now you can remove the front frame arms. You just need to pull a little and she clicks depart.
We got to the matrix, the 4 screws holding it on both sides.
But before you unscrew them off the connector board web-cameras (above).
Cut off? Feel free to proceed to the loosening of the matrix.
Put the matrix on the keyboard and disconnect the only connector that is on the bottom.
New matrix 10.1 ", who arrived from China:
Take the new matrix, connect the connector, and to cleave to the place of cables and wires as they were put on the matrix of her new position and fasten. Connect web-camera.
Before going to connect to the computer power supply and check if everything is working properly.
It remains to replace the frame, tighten the screws and glue in place decorative caps. Check that it's already assembled on the computer.
And after all the curious assembly (or to build) can parse the battered matrix to study its innards. This is a straight "entertaining physics" in practice!